穿珠针

产品说明

穿珠针(编号 1764/1)

DMC串珠针长2 - 2.25寸,由优质镀镍钢制成。包装内含4支11-13号穿珠针。

如何使用

DMC Beading Needles are thin enough to accommodate most bead holes for easy threading right onto your needle. To stitch on a bead use 1 ply matching colored floss. Knot one end of the thread and thread your beading needle. Bring needle up through the fabric to the right side and thread a bead onto the needle, slide it down to the fabric for correct positioning and then continue with your stitch. Continue sewing beads using this running stitch. On straight lines, depending on the size of the bead, several beads can be threaded on the needle and sewn on in a single stitch. Every 3 or 4 beads, take a back stitch to secure. Always use good quality glass beads for your embroidery project as plastic beads can melt during ironing.

To thread your beading needle you will use a version of the ‘Pinch and Poke’ needle threading method – Cut a clean end of thread and pinch it between your thumb and forefinger, leaving only a tiny little bit of the end exposed. Holding the needle in your other hand, “poke” the eye of the needle over the tip and the thread into the eye, then pull the thread through.

Other 针和配件